Handicap Bathroom Remodel Installing Plywood

The guys are adding the 2 bys for floor supports, getting things ready for plywood.

⏱️⏱️Chapters⏱️⏱️
00:00 Intro
00:12 Installing the plywood, and how the drain goes
00:35 Pre-drilling the wood because of how hard it is
01:13 Getting ready to install the drain
01:30 Have to cut a hole for the drain ledges
02:15 You'll seal it after you put it in
02:45 Measured wheel chair and added a bench to the shower

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: [email protected]
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#showerremodel #bathrroomremodel #handicappedshowerremodel

Transcript:
Now you've seen us. We screwed off everything. We have that two inch depth that we need. That's where a drain is going to be. And we put it. We cut off all the on this side. It's a bit steeper over here, but it's all going to run to there. So this is floating here and that goes downhill to there.

And then that goes this way. So we're putting in all this wood and going to the trouble of pre drilling it because we've had such a hard time with how hard the wood was.

Anyway. We'll come back to you when we get ready to put in the plywood. let me see that, drain.

So we're getting ready to put the rubber in and therefore the drain. Also. the first part. Is this unscrews. So you can adjust it to the height you want. But we've got to, cut a hole for this to sit down in, it has these little ledges. So what I did was turned upside down, marked around it with a pencil.

But then I measured.

Shows three quarters of an inch to th..